How To String A Tennis Racket Without A Machine?

As an amazon Associates we earn from qualifying purchases.



Strings are the most significant part of the tennis racket by which players can bounce the ball to the opposition’s court. It’s literally impossible to play tennis without strings. They also wear out and tear gradually and fixing them from shops is really expensive. If you try stringing it at home, you have to invest in a stringing machine which will cost around $200 to $2000. However, Can you string a tennis racket by hand for real? If yes, then how to string a tennis racket without a machine? 

The process is quite straightforward. You will just require awl, pilers, clippers & rulers to perform this job. Use the awl for creating an easy passage of the string through the holes. Start stringing from below, straighten the cord and maintain proper tension. Lastly tie the knot to keep the threads in place tightly.

In our content we have highlighted a detailed discussion on ‘How to string a tennis racket by hand’ along with FAQs. So, stay with us till the end & check out our exclusive tricks right away!


What To Consider Before You String The Tennis Racket?

Before starting the wholesome procedure of tennis racket stringing, you have to consider two basic points carefully which includes –

String Diameter: 

When it comes to diameter, you have two options at hand. Either you can go for long lasting & thick chords or you can choose highly functional thin chords. Due to their thickness, thick cords can’t make appealing sounds like thin cords. Among these two I personally would recommend thin cords as they are awesome for far reaching shots.

String Tension:

Considering the surface tension of the cords is also necessary to determine if the frame is sturdy enough to bear the string tension. If a player uses too high tension, the framework will break within a short period. Marching up the rocket’s tension with skill Level is also mandatory to achieve the best results. For beginners 20 to 25 lbs are more suitable where professionals may go for 30 lbs.

Preparatory Steps To String The Tennis Racket At Home: Check Out Now!

Remove Previous Strings: 

Before beginning to string the tennis racket, an individual has to remove previous strings first. It will make the whole procedure more straightforward & convenient. A sharp knife or clipper can assist in this regard. In order to trim previous threads, you can start by trimming the center ones and eventually move to the periphery.

Check The Grommets: 

If the racket is too old, it’s frame may feature multiple worn out grommets. Carefully look for broken Grommets and replace them if required.

Fix The Frame:

Once you are done with Grommets, it’s necessary to check out the frame too. There is obviously no point in stringing a tennis bat which has worn out already. Check out if the framework is sturdy enough to hold the tension of the strings. If there are cracks, mend those first beforehand.

Measure The String: 

In order to string the entire tennis racket, a player will require 40 feet strings minimally. You can also purchase the (40 feet) strings from a reel instead. That is a better yet cheaper option. We will advise to clip the strings at a diagonal angle for an easy entrance through the grommets.

Straighten The String:

Prepare the strings by straightening it and eliminating all the kinks. This step will assist in stringing without any mess or inconvenience. The cord won’t break easily while stringing as well.

Cut It Into Two Equal Halves:

Trimming the entire cord into two equal parts is a mandatory step as you can use half of them for horizontal stringing and the rest of them for vertical stringing.

How To string A Tennis Racket By Hand? Go For The Step By Step Guidelines Now! 

After going through all these preparatory steps, i bet you are still confused about, how to string a tennis racket without a machine? Can you string your own tennis racket? Is it really possible?

It may sound really difficult at first. However, trust me, once you go through the whole procedure, you won’t ever be ready to waste money on repair shops just for stringing. Why would you waste your hard earned money when manual stringing is so easy & cheap.

Let’s not dilly dally & get started now!

Vertical Strings:

Step 1: 

Firstly, insert the chord through the bottom grommet, straighten it and pull it out through the matching hole of the upper part of the frame.

Step 2: 

In order to achieve the most desirable string tension we have come with an accessory step. For this initial step you won’t require any special tool.

  • Firstly, grab a small tube/PVC pipe of 35 to 40ml and put a dowel in it.
  • Secondly you will require bog noddle to jam the tension you are going to build up.
  • Use this tiny tool as a capstan & rotate the string couple of times around it to achieve the required tension.
  • Now hold the dowel and turn it around 180° angle to tighten the strings.
  • Lastly put the pin to hold the tension you created.

Step 3: 

Now insert the cord through the next top hole, straighten the string and pull it out through the marching grommet below.

Step 4: 

Continue the same procedure while stringing from below again. Let the previous string act as a guideline for further stringing.

Step 5: 

Keep ongoing until you have reached the curved portion of the frame.

Step 6: 

At this point there should be sufficient cord left to make a knot. To tighten the thread you can also make a second knot just above the previous knot. If you don’t have enough thread left, adjust the top and try to lengthen it a bit. Making knot is really necessary to keep the strings in their place tightly.

Step 7: 

String the other half of the shaft using the same procedure. Make a knot just like the previous step after reaching the curved area of the frame. Before tying the knot check if the thread has achieved the exact tension you require.

Horizontal Strings:

Step 8: 

At the beginning of horizontal string, count the grommets from base and insert the cord through the 4th one. At this point, tie a knot from the inner aspect of the frame.

Step 9: 

The horizontal strings won’t follow a straightforward pathway like the vertical chords. Rather you need to pass it over and under the vertical Strings alternatively till you reach the opposite marching grommet. Keep the string tight enough to achieve the desired tension as well.

Step 10: 

If the initial weaving pattern was over-under design, go for under-over pattern in the next horizontal row. Keep on stringing till you reach the curve of the head.

Step 11: 

After reaching the last hole, ensure proper tightness and make a big knot quickly.

Step 12: 

Lastly cut off the excess threads and adjust the them effectively to prevent laxity or slackness.


Can you restring a tennis racket at home? 

Yes; it’s super convenient & cheap to restring the tennis racket at home. Even if you don’t own a machine, you can go for manual stringing. All you will require is awl, pilers, clippers, rulers, string and racket.

How hard is it to restring a tennis racket?

It’s really an easy job. At first it may consume a lot of time. After 2 or 3 trials, you will become competent enough to complete this whole procedure efficiently with 40 to 45 minutes.

Final Verdict: 

How to string a tennis racket without a machine? 

I know you were super confusing before and frustrated as well. I believe our content was effective enough as we have described the whole procedure in the easiest manner. Even if it’s your first time, you can manage it indeed. Just take your step and convert your old tennis racket into a new one now!

Related Blog 

best strings for wilson clash

best strings for babolat pure aero

how much does it cost to restring a tennis racket

More review

best pressureless tennis balls review

best tennis backpack

Leave a Comment